Gatehouse Deadbolt Removal

4 Easy Ways Of Removing Gatehouse Deadbolt

There are many people that live in apartment complexes or gated communities that have locked gates and no access card to get through them. This causes a lot of anger from the residents who live in these types of environments as it can cause a lot of distress if you lose your keys.

Your gatehouse deadbolt is locked, and your keys are nowhere to be found. It’s obvious that you will have to remove the lock yourself. But how do you do that? This guide will teach you different methods of deadbolt removal, allowing you to easily handle this task even if you’ve never dealt with a gatehouse deadbolt before.

How To Remove Gatehouse Deadbolt: Techniques

1. Thin Piece of Metal

The most common method is to use a thin piece of metal that fits over the keyhole and pushes the pins up until they line up with the shear line. Once they line up, they can easily be removed. This can be accomplished by using a bobby pin, paper clip or even a screwdriver if you are lucky enough to have one on hand.

2. Pliers

The best way to remove a deadbolt is with a tool designed specifically for that purpose. This method can damage the lock, however, and it takes a lot of strength to do it. This method is commonly used by many people to remove a gatehouse deadbolt.

All you need to do is insert the pliers into the keyhole and twist until it comes off smoothly. This method may not be effective for all brands of locks because some locks have holes that are too tight for the pliers to fit into. If you don’t have pliers, then try using any other tool that can fit into the keyhole.

3. Breaker Bar and Screwdriver

If there are no visible screws on either side of your lock, try using a breaker bar or other prying tool to pop off the faceplate or cover plate over your deadbolt cylinder mechanism. Once this is removed, use a screwdriver to finish removing any visible screws holding down your deadbolt locking mechanism before sliding it out from its housing inside your door frame.

If the screws are visible then First, you need to unscrew the screws from the backside of the deadbolt. and then use pliers or something similar to pull the deadbolt out of its frame completely or set your screwdriver into the grooves on both sides of the latch and twist it until it comes out.

4. Cut the Bolts

To cut the bolts, there are a few different methods that can be used. The first and most obvious way is to cut the bolts off with an angle grinder. This can be done by removing the screws on top of the lock and then cutting the bolts with an angle grinder. However, this method is not recommended because it could possibly damage your lock if not done correctly.

Another method would be to use a bolt cutter or a hacksaw to cut through the bolts. This will work great if you want to keep your lock in good condition but don’t want to spend a lot of money on another lock.

Conclusion

If you are stuck inside your house, you can use the above methods to remove the deadbolt without damaging the lock. If it doesn’t work, you will have to break the lock all together or call an expert to assist you.