Schlage VS Emtek

Schlage Vs. Emtek – Ultimate Guide for Differences and Similarities

We’ve all seen the recent news about how vulnerable smart locks are to hackers. If you are in the market for new door locks, you must have been wondering whether or not it is safe to buy a brand like Schlage; after all, they’ve been around forever. The other lock which you can use is Emtek. But now arises a question. Which one to choose?

The dilemma to choose Schlage or Emtek has been repeatedly faced by homeowners, architects, homeowners and property managers around the nation. Both are reputable brands with a variety of locksets and deadbolts under their belts. They produce various kinds of locking hardware, from lever deadbolts to electronic smart locks – all incorporating advanced locking mechanisms and provide maximum security. Each brand provides the best quality hardware and accessories with a wide range of features that possibly suit your home or business needs. How are you supposed to decide which brand is better?

In this article, we’ll talk about Emtek and Schlage locks, the difference between them and my recommendation on which one you should go with.

Differences Between Schlage Door Locks and Emtek Door Locks

Schlage Door Locks and Emtek Door Locks are two leading brands in the industry of security door locks. Both of them have their own set of advantages and disadvantages, and people are often confused on which one they should get. The following are some of the major differences between both brands.

1. Lock Styles and Finishes

Schlage uses a latchbolt design for its locks, while Emtek employs a deadbolt mechanism. Latchbolts have no locking bar, while deadbolts do. Deadbolts are much more secure than latchbolts because they can only be unlocked from the outside with a key or combination.

Emtek locks are designed for use with round door knobs only; they cannot be used with deadbolts because their design does not accommodate them (although there are some exceptions). However, these locks can be used on double doors as long as one side is equipped.

On the other hand, Both Schlage and Emtek offer locks in many different finishes, including brass, nickel and stainless steel. Schlage also offers its locks in bronze, which is an alloy of copper and tin. Nearly all Schlage locks have visible screws on their surface to provide extra security against tampering. The company’s less expensive models have fewer screws than its higher-end ones. In Emtek, Customers have the luxury of picking up to two finishes for one lockset.

2. Lock Types

Schlage produces a number of different lock types, including deadbolts, spring latches and mortise locks. Deadbolts are typically installed on exterior doors (such as garage doors) while spring latches are used on interior doors. Mortise locks fit into the edge of the door frame, while handlesets and knobs can be installed on either side of the door. Schlage also makes tubular door handlesets that have no moving parts other than the rotating knob itself.

Emtek offers only one lock type: deadbolts that are designed to fit into standard door jams. This means that if you have an older home with nonstandard jam widths or unusual trim around your doorframe, you may need to hire someone to customize your Emtek deadbolt before installation can begin.

3. Warranty

Schlage locks have a lifetime guarantee against defects in material and workmanship. If you have any problems with your Schlage lock or deadbolt within the first five years, they’ll replace it free of charge. After that, they will repair or replace it at a discounted rate.

Emtek’s warranty is similar: they also offer a lifetime guarantee against defects in material and workmanship, but they don’t offer any kind of warranty on labor or installation services. This means that if something goes wrong with your Emtek lock during installation or if it breaks down later down the line, you’re on your own for getting it fixed (or replaced).

4. Keyway Cylinder Type

The keyway type is one of the biggest differences between Schlage door locks and Emtek door locks. Schlage uses a standard A20 cylinder for all of their locks, while Emtek uses several different types of cylinders depending on what type of lock you’re looking for.

Schlage has been using A20 cylinders since the company’s inception in 1920, making it one of the most widely used cylinders in the world today. The A20 has several advantages over other types of cylinders such as deadbolts or mortise cylinders:

It’s easy to find replacement parts if they break or wear out over time (which is common with any mechanical device).

You can easily change the keyway yourself without having to call a professional locksmith in order to do so (although this may void your warranty).

Similarities Between Schlage Door Locks and Emtek Door Locks

1. Reputation

Both brands have a great name in terms of quality and services provided. They have a reputation for making high-end locks that are both beautiful and functional. In simple words, apart from a little difference, both are the best.

Conclusion

From the article, it is apparent that both brands are great in terms of locks, finishes and styles. It is up to you to choose which you think is best for you according to your requirements.